如今隨著技術的不斷發展，復合井蓋作為市政和建筑的常用材料得到了快速的發展，下面給大家講一下復合井蓋的安裝注意事項：

一、復合井蓋的磚砌體砌筑，應按照設計院設計的復合井蓋尺寸確定其內徑或者說長X寬、方圓，也可相應參照標準執行，并在復合井蓋外圍澆鑄寬為40cm的混凝土保護圈，保養期要在10天以上。

二、在瀝青路面上安裝復合井蓋時，一定要注意避免施工機械直接碾壓井座，在路面整體澆鑄時，應予在路面預留比井座略大的孔，在瀝青鋪完后安置。

三、混凝土將井座澆鑄或瀝青鋪設后，應及時將復合井蓋打開清洗，避免砂漿或瀝青將檢查復合井蓋與座澆成一體，以免影響日后開啟。

四、為保持蓋外表的美觀，表面花紋和字跡的清晰，以瀝青路面施工時應用簿鐵皮或木板覆蓋在復合井蓋上，黑色復合井蓋也可用廢機油等刷涂蓋面，防止瀝青噴在復合井蓋上。

時間在變，唯有不變的是一流的產品，領先的技術和我們誠摯的心，我們將在產品和產品質量方面不懈努力，不斷創新!

Today, with the continuous development of technology, as commonly used materials composite covers municipal and construction has been rapid development , for everyone to talk about the following precautions composite covers the installation of :

First, the composite covers brickwork masonry, shall determine its internal diameter or length X width in accordance with the Design Institute of composite covers size, radius , but also the corresponding reference standards and 40cm wide cast concrete perimeter protection in composite covers circle maintenance period to more than 10 days.

Second, when installing composite covers on the asphalt pavement, construction machinery must be taken to avoid direct rolling Wells Tower , the whole cast in the road , and should be well on the road reserved seat slightly larger than the hole in the asphalt Puwan placement.

Third, cast concrete or asphalt will be laid wells seat , it should be promptly cleaned composite covers open , avoid pouring mortar or asphalt will check composite covers and seat into one, in order to avoid turn-on .

Fourth, the beautiful cover to maintain the appearance of the surface patterns and writing clear , when applied to asphalt pavement construction book covering the metal or wood composite covers , black composite covers can also be used to cover up the waste oil and other brush to prevent asphalt sprayed composite covers on .

Time is changing, the only constant is the first-class products , leading technology and our sincere hearts, we will make unremitting efforts in product and product quality , innovation !